Inconel 625 (UNS N06625) Seamless Pipes & Tubes Manufacturer & Supplier
Alloy 625 (Inconel 625, UNS N06625) is a nickel-chromium-molybdenum alloy with niobium addition, providing exceptional strength and outstanding corrosion resistance across a wide range of temperatures. With PREN >50, it offers virtually complete immunity to pitting in seawater and the most aggressive chemical environments.
UNS: N06625 | Category: Nickel-Chromium-Molybdenum Alloy | Werkstoff Nr: 2.4856 | EN Name: NiCr22Mo9Nb
Size Range
Outer Diameter: 1/4" NPS to 10" NPS (6.35mm to 273.1mm OD)
Wall Thickness: SCH 5S to SCH 80S
Chemical Composition (%)
| Ni | Cr | Mo | Nb+Ta | Fe | C | Mn | Si | Al | Ti |
|---|---|---|---|---|---|---|---|---|---|
| 58.0 min | 20.0-23.0 | 8.0-10.0 | 3.15-4.15 | 5.0 max | 0.10 max | 0.50 max | 0.50 max | 0.40 max | 0.40 max |
Mechanical Properties
- Tensile Strength
- 827 MPa min
- Yield Strength
- 414 MPa min
- Elongation
- 30% min
- Hardness
- N/A
Physical Properties
- Density
- 8.44 g/cm3
- Melting Range
- 1290-1350 C
- Thermal Conductivity
- 9.8 W/m-K
- Electrical Resistivity
- 1290 nOhm-m
- Specific Heat
- 410 J/kg-K
- Coeff. of Thermal Expansion
- 12.8 um/m-C
Corrosion Resistance
- Pitting Resistance (PREN)
- >50 (exceptional)
- Max Service Temp (Oxidizing)
- 980 C
- Intergranular Corrosion
- Excellent (Nb stabilized)
- Stress Corrosion Cracking
- Outstanding
- General Corrosion Rate
- Virtually nil in most environments
- Seawater Resistance
- Outstanding - immune to pitting
Applicable Standards
- ASTM B444 / ASME SB444
- ASTM B163 / ASME SB163
- ASTM B704 / ASME SB704
- DIN 17751
Applications
- Subsea umbilicals and flowlines
- Aerospace exhaust systems and turbine components
- Chemical reactor vessels
- Nuclear waste processing
- Flue gas desulfurization
- Seawater equipment and marine hardware
- Semiconductor CVD/diffusion furnace hardware and corrosive gas panels
Industries Served
- Oil & Gas
- Aerospace
- Nuclear
- Chemical Processing
- Marine
- Semiconductor & Electronics
Key Advantages
- PREN >50 - virtually immune to pitting and crevice corrosion
- Outstanding strength from cryogenic to 980C
- Excellent fatigue and thermal fatigue resistance
- Nb-stabilized for intergranular corrosion resistance
- Approved for the most critical subsea applications
- Exceptional resistance to chloride and acid environments
Equivalent Grades
- ASTM
- N06625
- Trade
- Inconel 625
- DIN
- 2.4856
Frequently Asked Questions
What is the chemical composition of Alloy 625?
Alloy 625 contains Ni 58.0 min, Cr 20.0-23.0, Mo 8.0-10.0, Nb+Ta 3.15-4.15, Fe 5.0 max, C 0.10 max, Mn 0.50 max, Si 0.50 max, Al 0.40 max, Ti 0.40 max (weight %).
What are the mechanical properties of Alloy 625?
Tensile Strength: 827 MPa min; Yield Strength: 414 MPa min; Elongation: 30% min; Hardness: N/A.
What are the equivalent grades of Alloy 625?
Nearest equivalents of Alloy 625: N06625 (ASTM), Inconel 625 (Trade), 2.4856 (DIN). Equivalents are close matches, not identical; confirm against the governing standard.
Which standards does Stancor Stainless supply Alloy 625 to?
Alloy 625 is supplied to ASTM B444 / ASME SB444, ASTM B163 / ASME SB163, ASTM B704 / ASME SB704 and DIN 17751.
What sizes of Alloy 625 are available?
1/4" NPS to 10" NPS (6.35mm to 273.1mm OD).
What is Alloy 625 used for?
Alloy 625 is used for Subsea umbilicals and flowlines, Aerospace exhaust systems and turbine components, Chemical reactor vessels, Nuclear waste processing, Flue gas desulfurization and Seawater equipment and marine hardware.