Duplex 2205 (UNS S32205) Seamless Pipes & Tubes Manufacturer & Supplier

Duplex 2205 (UNS S32205) is the world's most widely used duplex stainless steel, with a balanced microstructure of approximately 50% ferrite and 50% austenite. It offers nearly double the yield strength of standard austenitic grades with superior corrosion resistance.

UNS: S32205 | Category: Duplex Stainless Steel | Werkstoff Nr: 1.4462 | EN Name: X2CrNiMoN22-5-3

Size Range

Outer Diameter: 1/4" NPS to 10" NPS (6.35mm to 273.1mm OD)

Wall Thickness: SCH 5S to SCH 160

Chemical Composition (%)

CMnSiCrNiMoNPS
0.030 max2.00 max1.00 max22.0-23.04.5-6.53.0-3.50.14-0.200.030 max0.020 max

Mechanical Properties

Tensile Strength
655 MPa min
Yield Strength
450 MPa min
Elongation
25% min
Hardness
31 HRC max

Physical Properties

Density
7.82 g/cm3
Melting Range
1350-1400 C
Thermal Conductivity
19 W/m-K
Electrical Resistivity
850 nOhm-m
Specific Heat
480 J/kg-K
Coeff. of Thermal Expansion
13.0 um/m-C

Corrosion Resistance

Pitting Resistance (PREN)
~35
Max Service Temp (Oxidizing)
315 C (to avoid 475C embrittlement)
Intergranular Corrosion
Highly resistant
Stress Corrosion Cracking
Excellent resistance vs austenitic
General Corrosion Rate
<0.02 mm/yr in most environments
Seawater Resistance
Excellent up to 20C

Applicable Standards

Applications

Industries Served

Key Advantages

Equivalent Grades

ASTM
S32205/S31803
NORSOK
MDS D45
Trade
SAF 2205

Frequently Asked Questions

What is the chemical composition of Duplex 2205?

Duplex 2205 contains C 0.030 max, Mn 2.00 max, Si 1.00 max, Cr 22.0-23.0, Ni 4.5-6.5, Mo 3.0-3.5, N 0.14-0.20, P 0.030 max, S 0.020 max (weight %).

What are the mechanical properties of Duplex 2205?

Tensile Strength: 655 MPa min; Yield Strength: 450 MPa min; Elongation: 25% min; Hardness: 31 HRC max.

What are the equivalent grades of Duplex 2205?

Nearest equivalents of Duplex 2205: S32205/S31803 (ASTM), MDS D45 (NORSOK), SAF 2205 (Trade). Equivalents are close matches, not identical; confirm against the governing standard.

Which standards does Stancor Stainless supply Duplex 2205 to?

Duplex 2205 is supplied to ASTM A789 / ASME SA789, ASTM A790 / ASME SA790, NORSOK MDS D45 and DIN EN 10216-5.

What sizes of Duplex 2205 are available?

1/4" NPS to 10" NPS (6.35mm to 273.1mm OD).

What is Duplex 2205 used for?

Duplex 2205 is used for Offshore oil & gas platforms, Chemical process vessels and piping, Heat exchangers in aggressive media, Desalination plants, Structural marine applications and Pulp & paper digesters.