Monel 400 (UNS N04400) Seamless Pipes & Tubes Manufacturer & Supplier
Monel 400 (UNS N04400) is a nickel-copper alloy with excellent resistance to seawater, hydrofluoric acid, and many reducing acids. The combination of nickel and copper creates a material that is virtually immune to chloride stress corrosion cracking, making it the industry standard for marine and seawater applications.
UNS: N04400 | Category: Nickel-Copper Alloy | Werkstoff Nr: 2.4360 | EN Name: NiCu30Fe
Size Range
Outer Diameter: 1/4" NPS to 10" NPS (6.35mm to 273.1mm OD)
Wall Thickness: SCH 5S to SCH 80S
Chemical Composition (%)
| Ni | Cu | Fe | C | Mn | Si | S |
|---|---|---|---|---|---|---|
| 63.0 min | 28.0-34.0 | 2.5 max | 0.30 max | 2.00 max | 0.50 max | 0.024 max |
Mechanical Properties
- Tensile Strength
- 517 MPa min
- Yield Strength
- 172 MPa min
- Elongation
- 35% min
- Hardness
- N/A
Physical Properties
- Density
- 8.80 g/cm3
- Melting Range
- 1300-1350 C
- Thermal Conductivity
- 21.8 W/m-K
- Electrical Resistivity
- 510 nOhm-m
- Specific Heat
- 427 J/kg-K
- Coeff. of Thermal Expansion
- 13.9 um/m-C
Corrosion Resistance
- Pitting Resistance (PREN)
- N/A (Ni-Cu alloy)
- Max Service Temp (Oxidizing)
- 480 C
- Intergranular Corrosion
- Resistant
- Stress Corrosion Cracking
- Excellent in most environments
- General Corrosion Rate
- Excellent in reducing acids and seawater
- Seawater Resistance
- Outstanding - industry standard
Applicable Standards
- ASTM B165 / ASME SB165
- ASTM B163 / ASME SB163
- ASTM B730 / ASME SB730
- DIN 17751
Applications
- Seawater piping and valves
- Marine heat exchangers
- Crude oil distillation columns
- Hydrofluoric acid processing
- Feedwater heaters
- Brine handling and deaeration
- Semiconductor HF and fluorine-bearing chemical/gas lines
Industries Served
- Marine
- Oil & Gas
- Chemical Processing
- Power Generation
- Desalination
- Semiconductor & Electronics
Key Advantages
- Outstanding seawater and marine corrosion resistance
- Excellent resistance to hydrofluoric acid (HF)
- Immune to chloride stress corrosion cracking
- Good resistance to reducing acids and alkalis
- Proven track record in marine service exceeding 50 years
- Good mechanical properties from cryogenic to moderate temperatures
Equivalent Grades
- ASTM
- N04400
- Trade
- Monel 400
- DIN
- 2.4360
Frequently Asked Questions
What is the chemical composition of Monel 400?
Monel 400 contains Ni 63.0 min, Cu 28.0-34.0, Fe 2.5 max, C 0.30 max, Mn 2.00 max, Si 0.50 max, S 0.024 max (weight %).
What are the mechanical properties of Monel 400?
Tensile Strength: 517 MPa min; Yield Strength: 172 MPa min; Elongation: 35% min; Hardness: N/A.
What are the equivalent grades of Monel 400?
Nearest equivalents of Monel 400: N04400 (ASTM), Monel 400 (Trade), 2.4360 (DIN). Equivalents are close matches, not identical; confirm against the governing standard.
Which standards does Stancor Stainless supply Monel 400 to?
Monel 400 is supplied to ASTM B165 / ASME SB165, ASTM B163 / ASME SB163, ASTM B730 / ASME SB730 and DIN 17751.
What sizes of Monel 400 are available?
1/4" NPS to 10" NPS (6.35mm to 273.1mm OD).
What is Monel 400 used for?
Monel 400 is used for Seawater piping and valves, Marine heat exchangers, Crude oil distillation columns, Hydrofluoric acid processing, Feedwater heaters and Brine handling and deaeration.