Stainless Steel 304H Seamless Pipes & Tubes Manufacturer & Supplier

SS 304H (UNS S30409) is the high-carbon version of 304, with carbon controlled to 0.04-0.10%. This higher carbon content provides significantly improved creep strength and rupture properties at temperatures between 425-816C, making it the preferred grade for boiler, superheater, and heat exchanger applications in power generation and petrochemical industries.

UNS: S30409 | Category: Austenitic Stainless Steel | Werkstoff Nr: 1.4948 | EN Name: X6CrNi18-10

Size Range

Outer Diameter: 1/4" NPS to 10" NPS (6.35mm to 273.1mm OD)

Wall Thickness: SCH 5S to SCH 160, XXS

Chemical Composition (%)

CMnSiCrNiPS
0.04-0.102.00 max0.75 max18.0-20.08.0-10.50.045 max0.030 max

Mechanical Properties

Tensile Strength
515 MPa min
Yield Strength
205 MPa min
Elongation
35% min
Hardness
92 HRB max

Physical Properties

Density
7.93 g/cm3
Melting Range
1400-1450 C
Thermal Conductivity
16.2 W/m-K
Electrical Resistivity
720 nOhm-m
Specific Heat
500 J/kg-K
Coeff. of Thermal Expansion
17.2 um/m-C

Corrosion Resistance

Pitting Resistance (PREN)
~18
Max Service Temp (Oxidizing)
870 C (continuous)
Intergranular Corrosion
Susceptible if sensitized (higher carbon)
Stress Corrosion Cracking
Susceptible in chlorides >60C
General Corrosion Rate
<0.1 mm/yr in mild acids
Seawater Resistance
Limited - pitting risk

Applicable Standards

Applications

Industries Served

Key Advantages

Equivalent Grades

ASTM
TP304H
JIS
SUS 304HTB
BS
304S51
GOST
08Kh18N10

Frequently Asked Questions

What is the chemical composition of SS 304H?

SS 304H contains C 0.04-0.10, Mn 2.00 max, Si 0.75 max, Cr 18.0-20.0, Ni 8.0-10.5, P 0.045 max, S 0.030 max (weight %).

What are the mechanical properties of SS 304H?

Tensile Strength: 515 MPa min; Yield Strength: 205 MPa min; Elongation: 35% min; Hardness: 92 HRB max.

What are the equivalent grades of SS 304H?

Nearest equivalents of SS 304H: TP304H (ASTM), SUS 304HTB (JIS), 304S51 (BS), 08Kh18N10 (GOST). Equivalents are close matches, not identical; confirm against the governing standard.

Which standards does Stancor Stainless supply SS 304H to?

SS 304H is supplied to ASTM A312 / ASME SA312, ASTM A213 / ASME SA213, ASTM A269 and DIN EN 10216-5.

What sizes of SS 304H are available?

1/4" NPS to 10" NPS (6.35mm to 273.1mm OD).

What is SS 304H used for?

SS 304H is used for High-temperature service (425-816C), Power plant superheater and reheater tubes, Refinery heater tubes and furnace components, Boiler and pressure vessel components, Heat treatment equipment and Petrochemical cracking furnaces.