Stainless Steel 310S Seamless Pipes & Tubes Manufacturer & Supplier

SS 310S (UNS S31008) is a high-chromium, high-nickel austenitic stainless steel designed for outstanding high-temperature oxidation resistance. With 25% Cr and 20% Ni, it maintains strength and resists scaling up to 1150C, making it ideal for furnace and heat treatment applications.

UNS: S31008 | Category: Austenitic Stainless Steel | Werkstoff Nr: 1.4845 | EN Name: X8CrNi25-21

Size Range

Outer Diameter: 1/4" NPS to 10" NPS (6.35mm to 273.1mm OD)

Wall Thickness: SCH 5S to SCH 80S

Chemical Composition (%)

CMnSiCrNiPS
0.08 max2.00 max1.50 max24.0-26.019.0-22.00.045 max0.030 max

Mechanical Properties

Tensile Strength
515 MPa min
Yield Strength
205 MPa min
Elongation
35% min
Hardness
95 HRB max

Physical Properties

Density
7.98 g/cm3
Melting Range
1400-1455 C
Thermal Conductivity
14.2 W/m-K
Electrical Resistivity
780 nOhm-m
Specific Heat
500 J/kg-K
Coeff. of Thermal Expansion
15.9 um/m-C

Corrosion Resistance

Pitting Resistance (PREN)
~25
Max Service Temp (Oxidizing)
1150 C (intermittent 1035 C continuous)
Intergranular Corrosion
Moderate susceptibility
Stress Corrosion Cracking
Good resistance due to high Ni
General Corrosion Rate
Excellent in oxidizing environments
Seawater Resistance
Moderate

Applicable Standards

Applications

Industries Served

Key Advantages

Equivalent Grades

ASTM
TP310S
JIS
SUS 310S
BS
310S16

Frequently Asked Questions

What is the chemical composition of SS 310S?

SS 310S contains C 0.08 max, Mn 2.00 max, Si 1.50 max, Cr 24.0-26.0, Ni 19.0-22.0, P 0.045 max, S 0.030 max (weight %).

What are the mechanical properties of SS 310S?

Tensile Strength: 515 MPa min; Yield Strength: 205 MPa min; Elongation: 35% min; Hardness: 95 HRB max.

What are the equivalent grades of SS 310S?

Nearest equivalents of SS 310S: TP310S (ASTM), SUS 310S (JIS), 310S16 (BS). Equivalents are close matches, not identical; confirm against the governing standard.

Which standards does Stancor Stainless supply SS 310S to?

SS 310S is supplied to ASTM A312 / ASME SA312, ASTM A213 / ASME SA213 and DIN EN 10216-5.

What sizes of SS 310S are available?

1/4" NPS to 10" NPS (6.35mm to 273.1mm OD).

What is SS 310S used for?

SS 310S is used for Furnace components and radiant tubes, Heat treatment baskets and fixtures, Kiln liners and burner nozzles, Thermal processing equipment, Flare tips and stacks and Cement plant equipment.