Stainless Steel 316L Ultra-High-Purity (VAR / VIM-VAR) Seamless Tubing Manufacturer & Supplier

SS 316L UHP is a controlled-chemistry 316L produced by Vacuum Arc Remelting (VAR) or VIM-VAR to minimise non-metallic inclusions, with sulphur controlled to 0.005-0.017% for consistent orbital weldability. Delivered electropolished (Ra 0.25 um / 10 Ra-in or better), helium leak-tested, nitrogen-purged, capped and double-bagged for cleanroom entry, it is the standard tubing for semiconductor gas and high-purity fluid systems. Stancor supplies UHP tubing through qualified electropolishing partners, with an in-house EP line on the investment roadmap.

UNS: S31603 | Category: Austenitic Stainless Steel - UHP Grade | Werkstoff Nr: 1.4404 / 1.4435 | EN Name: X2CrNiMo17-12-2 (controlled chemistry)

Size Range

Outer Diameter: 1/8" to 2" OD (3.18mm to 50.8mm OD)

Wall Thickness: 0.035" to 0.083" (0.89mm to 2.11mm)

Chemical Composition (%)

CMnSiCrNiMoSPON
0.030 max2.00 max0.75 max16.0-18.010.0-15.02.0-3.00.005-0.017 (controlled)0.030 max50 ppm max (VAR)0.10 max

Mechanical Properties

Tensile Strength
485 MPa min
Yield Strength
170 MPa min
Elongation
35% min
Hardness
90 HRB max

Physical Properties

Density
7.98 g/cm3
Melting Range
1375-1400 C
Thermal Conductivity
16.3 W/m-K
Electrical Resistivity
740 nOhm-m
Specific Heat
500 J/kg-K
Coeff. of Thermal Expansion
15.9 um/m-C

Corrosion Resistance

Pitting Resistance (PREN)
~24-26
Max Service Temp (Oxidizing)
870 C
Intergranular Corrosion
Resistant (low carbon)
Stress Corrosion Cracking
Better than 304L in chlorides
General Corrosion Rate
<0.05 mm/yr; Cr/Fe-enriched passive layer after electropolishing
Seawater Resistance
Moderate

Applicable Standards

Applications

Industries Served

Key Advantages

Equivalent Grades

ASTM
TP316L (controlled S)
SEMI
F20 Type 1 / Type 2
DIN
1.4404 / 1.4435

Frequently Asked Questions

What is the chemical composition of SS 316L UHP (VAR)?

SS 316L UHP (VAR) contains C 0.030 max, Mn 2.00 max, Si 0.75 max, Cr 16.0-18.0, Ni 10.0-15.0, Mo 2.0-3.0, S 0.005-0.017 (controlled), P 0.030 max, O 50 ppm max (VAR), N 0.10 max (weight %).

What are the mechanical properties of SS 316L UHP (VAR)?

Tensile Strength: 485 MPa min; Yield Strength: 170 MPa min; Elongation: 35% min; Hardness: 90 HRB max.

What are the equivalent grades of SS 316L UHP (VAR)?

Nearest equivalents of SS 316L UHP (VAR): TP316L (controlled S) (ASTM), F20 Type 1 / Type 2 (SEMI), 1.4404 / 1.4435 (DIN). Equivalents are close matches, not identical; confirm against the governing standard.

Which standards does Stancor Stainless supply SS 316L UHP (VAR) to?

SS 316L UHP (VAR) is supplied to SEMI F20 (UHP tubing chemistry & cleanliness), SEMI F19 (surface finish Ra), ASTM A269 / A270, ASTM A632 and ASTM A213 / ASME SA213.

What sizes of SS 316L UHP (VAR) are available?

1/8" to 2" OD (3.18mm to 50.8mm OD).

What is SS 316L UHP (VAR) used for?

SS 316L UHP (VAR) is used for UHP specialty and bulk gas distribution (N2, Ar, He, H2, O2, SiH4, NF3), Gas cabinets, valve manifold boxes and gas sticks, CMP slurry and DI water distribution, Sub-fab process cooling water (PCW) loops, Orbital-welded cleanroom process piping and Pharmaceutical WFI and biotech high-purity lines.