Stainless Steel 347 Seamless Pipes & Tubes Manufacturer & Supplier

SS 347 (UNS S34700) is a niobium (columbium)-stabilized austenitic stainless steel providing superior resistance to intergranular corrosion at elevated temperatures. Preferred over 321 where intermittent heating is involved, as niobium provides more reliable stabilization than titanium.

UNS: S34700 | Category: Austenitic Stainless Steel | Werkstoff Nr: 1.4550 | EN Name: X6CrNiNb18-10

Size Range

Outer Diameter: 1/4" NPS to 10" NPS (6.35mm to 273.1mm OD)

Wall Thickness: SCH 5S to SCH 160

Chemical Composition (%)

CMnSiCrNiNb+TaPS
0.08 max2.00 max0.75 max17.0-19.09.0-13.010xC min0.045 max0.030 max

Mechanical Properties

Tensile Strength
515 MPa min
Yield Strength
205 MPa min
Elongation
35% min
Hardness
92 HRB max

Physical Properties

Density
7.96 g/cm3
Melting Range
1400-1425 C
Thermal Conductivity
16.1 W/m-K
Electrical Resistivity
730 nOhm-m
Specific Heat
500 J/kg-K
Coeff. of Thermal Expansion
17.2 um/m-C

Corrosion Resistance

Pitting Resistance (PREN)
~17.5
Max Service Temp (Oxidizing)
900 C
Intergranular Corrosion
Resistant (Nb stabilized)
Stress Corrosion Cracking
Susceptible in chlorides >60C
General Corrosion Rate
<0.1 mm/yr in mild acids
Seawater Resistance
Limited

Applicable Standards

Applications

Industries Served

Key Advantages

Equivalent Grades

ASTM
TP347
JIS
SUS 347
BS
347S31
GOST
08Kh18N12B

Frequently Asked Questions

What is the chemical composition of SS 347?

SS 347 contains C 0.08 max, Mn 2.00 max, Si 0.75 max, Cr 17.0-19.0, Ni 9.0-13.0, Nb+Ta 10xC min, P 0.045 max, S 0.030 max (weight %).

What are the mechanical properties of SS 347?

Tensile Strength: 515 MPa min; Yield Strength: 205 MPa min; Elongation: 35% min; Hardness: 92 HRB max.

What are the equivalent grades of SS 347?

Nearest equivalents of SS 347: TP347 (ASTM), SUS 347 (JIS), 347S31 (BS), 08Kh18N12B (GOST). Equivalents are close matches, not identical; confirm against the governing standard.

Which standards does Stancor Stainless supply SS 347 to?

SS 347 is supplied to ASTM A312 / ASME SA312, ASTM A213 / ASME SA213, ASTM A269 and DIN EN 10216-5.

What sizes of SS 347 are available?

1/4" NPS to 10" NPS (6.35mm to 273.1mm OD).

What is SS 347 used for?

SS 347 is used for High-temperature process piping, Catalytic cracking units, Fired heaters and furnace tubes, Reformer piping, Ammonia production plants and Thermal cycling applications.